Wick 100% Organic Cotton BIO 3mt 2mm - Jimdo are cotton flaps (wick) used to regenerate old generation atomizers or resistances. The Wicks are 100% Organic Organic Cotton and each pack includes flaps for a total of 3 meters , with a cotton diameter of 2mm .
Pre-made resistors MTL 28ga Ni80 1.3oHm - Yatchvape are pre-made resistors for regenerable atomizers .
The 28ga MTL resistors in 1.3oHm Ni80 material are optimized for use on regenerable atomizers with cheek vape . The coils have an internal diameter of 3mm and allow an abundance of cotton in the regeneration phase.
Cotton Titanium Fiber Cotton Elite is a 100% organic cotton of the highest and highest quality. Used in regenerable atomizers , it is considered one of the best cottons thanks to its incredible absorption capacity and absolute neutrality of flavor .
Pre-made coils in Ni80 Dovpo are pre-made resistors for DTL regenerable atomizers , introducing a different and complete taste experience for DIY.
28ga (0.32mm) Youde Ni80 UD Youde resistive wire. 10 meters long nickel alloy coil suitable for regenerable cheek and lung atomizers .
Nickel wire has a low temperature coefficient of resistance and low change in resistance over its life which combine to ensure faster heat-up times , smoother operating temperatures, and longer life.
Curved Coil Master Ceramic Pliers are a necessary tool to regenerate any RDA, RTA or RDTA atomizer.
This newly designed curved ceramic tweezer is perfect for any situation that requires the use of non-conductive, heat-resistant tweezers that allows the user to make resistance adjustments without shorting.
22ga (0.64mm) UD Youde resistive wire. Kanthal alloy coil 10 meters long suitable for regenerable lung atomizers .
UD Youde resistive wire 24ga (0.50mm). Kanthal alloy coil 10 meters long suitable for regenerable lung atomizers .
Mesh resistors OFRF NexMesh from 0.15oHm in SS316 with measure 16mm by 6.8mm.
The new Mesh resistors from OFRF offer faster heating than other types of mesh coils.
Suitable and compatible with Wotofo Profile 1.5.
Straight tip pliers in ceramic and steel useful for regenerating your own regenerable atomizers and for assembling circuits.
The pliers are equipped with ceramic tips to avoid false contact with the resistances during the positioning of the cotton. In addition, the ceramic pliers support very high heat.
Vape Tweezer Coil Master Ceramic Tongs. Useful for regenerating your own regenerable atomizers.
The Tweezer pliers are equipped with ceramic tips to avoid false contact with the resistors during the positioning of the cotton. In addition, the ceramic pliers support very high heat.
Resistors Mesh NexMesh Turbo A1 Wotofo from 0.13oHm with measuring 16mm by 6.8mm.
Suitable and compatible with Wotofo Profile 1.5.
Resistors Mesh NexMesh Chill A1 Wotofo from 0.15oHm with measuring 16mm by 6.8mm.
Suitable and compatible with Wotofo Profile 1.5.
OFRF NexMesh Mesh Resistors with 16mm by 6.8mm measurement.
The new Mesh resistors from OFRF offer faster heating than other types of mesh coils.
Suitable and compatible with Wotofo Profile 1.5.
Wotofo Prefact Resistors Dual Core Fused Clapton type for Rebuildable Cheek Atomizers . Resistors in Ni80 (Nickel80) with a diameter between 2.5.
Excellent for a high performance and high aromatic cheek vape.
GeekVape 22GA (0,65mm) Resistive Wire in Kanthal A1 alloy. Great for Flavor or Pulmonary vape for high performance.
Length of line 5 meters .
Cloud 9 Cotton is an Australian cotton. 100% cotton of the highest quality. Great for flavor and high wattage lung vape .
The Cloud 9 is characterized by being a 100% natural cotton. No chemical treatment. No bleaching. Neutral flavor.
Resistive wire DOUBLE TWISTED KANTHAL 30ga - roll 0.25mm x 10m.
Coil in double braided wire in Kanthal A1 alloy from 30GA ideal for a cheek vape or for the flavor.
The Demon Killer Terp Done Tool Kit is a professional kit for the DIY extraction and mixing of aromas. It has small size and comes with complete tools, which will meet your DIY vaping needs.
Small size cutting pliers that can be used for remanufacturing, circuit checking, cleaning and making your DIY easier.
The Cotton Bacon V2.0 by Wick \'n\' Vape was made for the most passionate vapers! Made in America and is 100% tasteless!
SS316L 24ga UD resistive wire for regeneration, sealed and packaged in a 10 meter reel.
Resistive wire of the Vandy Vape in Kanthal A1 for regenerable atomizers.
A necessary tool for a correct realization of regenerable coils.
High quality absorbent material, heat resistant. It should be well wet before use, but once moistened it feeds very well.
Wick \'N Cotton 10g Cotton Bacon Prime is a more compact and combed high speed absorbent cotton that is extremely easy to use.
Tweezers for regeneration, made of stainless steel with ceramic tip.
The kit comes with 5 DIY tools, including diagonal pliers, scissors, ceramic tweezer.
All mini tools are of high quality to meet the different needs of all users.
Wick 100% Organic Cotton BIO 3mt 2mm - Jimdo are cotton flaps (wick) used to regenerate old generation atomizers or resistances. The Wicks are 100% Organic Organic Cotton and each pack includes flaps for a total of 3 meters , with a cotton diameter of 2mm .
Pre-made resistors MTL 28ga Ni80 1.3oHm - Yatchvape are pre-made resistors for regenerable atomizers .
The 28ga MTL resistors in 1.3oHm Ni80 material are optimized for use on regenerable atomizers with cheek vape . The coils have an internal diameter of 3mm and allow an abundance of cotton in the regeneration phase.
Cotton Titanium Fiber Cotton Elite is a 100% organic cotton of the highest and highest quality. Used in regenerable atomizers , it is considered one of the best cottons thanks to its incredible absorption capacity and absolute neutrality of flavor .
Pre-made coils in Ni80 Dovpo are pre-made resistors for DTL regenerable atomizers , introducing a different and complete taste experience for DIY.
28ga (0.32mm) Youde Ni80 UD Youde resistive wire. 10 meters long nickel alloy coil suitable for regenerable cheek and lung atomizers .
Nickel wire has a low temperature coefficient of resistance and low change in resistance over its life which combine to ensure faster heat-up times , smoother operating temperatures, and longer life.
Curved Coil Master Ceramic Pliers are a necessary tool to regenerate any RDA, RTA or RDTA atomizer.
This newly designed curved ceramic tweezer is perfect for any situation that requires the use of non-conductive, heat-resistant tweezers that allows the user to make resistance adjustments without shorting.
22ga (0.64mm) UD Youde resistive wire. Kanthal alloy coil 10 meters long suitable for regenerable lung atomizers .
UD Youde resistive wire 24ga (0.50mm). Kanthal alloy coil 10 meters long suitable for regenerable lung atomizers .
Mesh resistors OFRF NexMesh from 0.15oHm in SS316 with measure 16mm by 6.8mm.
The new Mesh resistors from OFRF offer faster heating than other types of mesh coils.
Suitable and compatible with Wotofo Profile 1.5.
Straight tip pliers in ceramic and steel useful for regenerating your own regenerable atomizers and for assembling circuits.
The pliers are equipped with ceramic tips to avoid false contact with the resistances during the positioning of the cotton. In addition, the ceramic pliers support very high heat.
Vape Tweezer Coil Master Ceramic Tongs. Useful for regenerating your own regenerable atomizers.
The Tweezer pliers are equipped with ceramic tips to avoid false contact with the resistors during the positioning of the cotton. In addition, the ceramic pliers support very high heat.
Resistors Mesh NexMesh Turbo A1 Wotofo from 0.13oHm with measuring 16mm by 6.8mm.
Suitable and compatible with Wotofo Profile 1.5.
Resistors Mesh NexMesh Chill A1 Wotofo from 0.15oHm with measuring 16mm by 6.8mm.
Suitable and compatible with Wotofo Profile 1.5.
OFRF NexMesh Mesh Resistors with 16mm by 6.8mm measurement.
The new Mesh resistors from OFRF offer faster heating than other types of mesh coils.
Suitable and compatible with Wotofo Profile 1.5.
Wotofo Prefact Resistors Dual Core Fused Clapton type for Rebuildable Cheek Atomizers . Resistors in Ni80 (Nickel80) with a diameter between 2.5.
Excellent for a high performance and high aromatic cheek vape.
GeekVape 22GA (0,65mm) Resistive Wire in Kanthal A1 alloy. Great for Flavor or Pulmonary vape for high performance.
Length of line 5 meters .
Cloud 9 Cotton is an Australian cotton. 100% cotton of the highest quality. Great for flavor and high wattage lung vape .
The Cloud 9 is characterized by being a 100% natural cotton. No chemical treatment. No bleaching. Neutral flavor.
Resistive wire DOUBLE TWISTED KANTHAL 30ga - roll 0.25mm x 10m.
Coil in double braided wire in Kanthal A1 alloy from 30GA ideal for a cheek vape or for the flavor.
The Demon Killer Terp Done Tool Kit is a professional kit for the DIY extraction and mixing of aromas. It has small size and comes with complete tools, which will meet your DIY vaping needs.
Small size cutting pliers that can be used for remanufacturing, circuit checking, cleaning and making your DIY easier.
The Cotton Bacon V2.0 by Wick \'n\' Vape was made for the most passionate vapers! Made in America and is 100% tasteless!
SS316L 24ga UD resistive wire for regeneration, sealed and packaged in a 10 meter reel.
Resistive wire of the Vandy Vape in Kanthal A1 for regenerable atomizers.
A necessary tool for a correct realization of regenerable coils.
High quality absorbent material, heat resistant. It should be well wet before use, but once moistened it feeds very well.
Wick \'N Cotton 10g Cotton Bacon Prime is a more compact and combed high speed absorbent cotton that is extremely easy to use.
Tweezers for regeneration, made of stainless steel with ceramic tip.
The kit comes with 5 DIY tools, including diagonal pliers, scissors, ceramic tweezer.
All mini tools are of high quality to meet the different needs of all users.
